Overview
HeroGrip® EnviroMight is the eco-forward adhesive with the strength of a hero. Its bio-solvent formulation delivers outstanding coverage, rapid grab and a long open time — giving installers and fabricators the flexibility they need on busy job sites. Tested to AS 1530.3 and certified low VOC, EnviroMight helps create a safer, healthier environment without sacrificing performance.
Ideal for laminating, board bonding, whiteboards, foam fabrication and general upholstery, EnviroMight offers dependable adhesion, clean spray patterns and industry-leading heat resistance up to 120°C. When you need sustainability and strength in the same canister, EnviroMight is your go-to.
Sizes
- 500mL Aerosol
- 22L Canister
- 108L Intermediate
- 220L Jumbo
Colours
- Clear
Registered
brand of
Applications
Main applications
- ABS edging
- Fibreglass infusion
- HMR board/particle board
- Laminate
- MDF/fibreboard/chipboard
- Pin board
- Plywood
- Stainless steel
See all applications in our Technical Data Sheet
See all applications in our Technical Data Sheet
Accessories
Only use the following accessories for a safe and successful application.
>
>
>
>
>
Product images shown are indicative and may not exactly match the actual item.
How to use
- Conditions
Ensure adhesive and surfaces are between 10°C and 35°C.
- Surface preparation
Ensure both surfaces are clean, dry and free from contaminants.
- Application
Spray adhesive evenly onto both surfaces.
- Flash-off
Allow to dry until no longer tacky.
- Bonding
Bring surfaces together and apply firm, even pressure for optimum strength.
- Temperature caution
Avoid spraying below 10°C to prevent moisture formation.
Downloads
Find the quality product you need
Product Finder
